 |
Our Race Ramps products will not slide across a garage floor, dig into an asphalt driveway, or scratch or otherwise damage a cement or painted floor. They can be used on grass, dirt, or almost any other flat surface, and they will never rust. Race Ramps come complete with straps for easy carrying and storage.
|
|
56” RACE RAMPS
 |
| |
56” Race Ramps are ideal for low ground clearance vehicles with tires up to 10” wide. With an incline of only 10.75 degrees, they lift your car up 8” and hold up to 3,000 pounds per set while weighing only 10 pounds per ramp. They are built in one solid piece, making them durable and sturdy.
 
|
|
And now you can have all the great features of the standard 56" Race Ramps but in a convenient TWO-PIECE DESIGN for access from the side of the car as well as the front and rear. Each ramp can still be stored as one piece (or two if you wish).
Back to top |
|
67” RACE RAMPS XTs
Race Ramp XTs are ideal for low ground clearance vehicles with tires up to 12” wide. With an incline of only 10.75°, they raise the car up 10” and hold up to 3,000 pounds per set while weighing only 15 pounds each. They are built in one solid piece, making them durable and sturdy.
 
Our 67” Race Ramp XTs are also available in a convenient TWO-PIECE DESIGN for access from the side of the car as well as the front and rear. Each ramp can still be stored as one piece (or two if you wish).
Back to top |
|
XTENDERS FOR 56” AND 67” RAMPS
56" Mate – RR-EX-12
67" Mate – RR-EX-14
 
XTenders nest right into your one or two-piece 56” or 67” Race Ramps, giving you an approach angle of only 6.8° for use with vehicles really low to the ground. They mate easily with the 56” or 67” Race Ramps and can be removed once the vehicle is up the ramp to provide additional working area.
* These ramps are not to be used by themselves. They are designed only to be used with 56” and 67” Race Ramps.*
Back to top |
|
WHEEL CRIBS AVAILABLE 8”, 10” OR 12” HIGH
Wheel Cribs are a safe, lightweight alternative to jack stands. They cradle the tire 8”, 10”, or 12” off the ground (depending on the model), providing unobstructed access underneath the car. Each crib supports 1,500 pounds (3,000 pounds per set) and weighs only 5 pounds. Using 8” or 10" Wheel Cribs in conjunction with 56” or 67” Race Ramps allows your car to be level while raised—useful for changing your oil, for example. Wheel Cribs also can be used for car display and are available in custom sizes.
8” Wheel Crib – RR-WC-8
10” Wheel Crib – RR-WC-10
12” Wheel Crib – RR-WC-12
Adjustable Wheel Cribs are a two-piece version of your standard Wheel Cribs. Each crib comes as a stacked assembly of two interlocking pieces of equal height. Their design allows the vehicle to be lifted in incremental heights that provide clearance for a jack and a spacer. Each set supports 3,000 pounds, yet each crib weighs only 7-10 pounds! They can hold tires up to 12" wide with diameters from 25" to 30". You can use one set as either two 8"/10"/12" cribs, or four 4"/5"/6" cribs when the set is split (heights depend on which model you purchase).
*You must use Wheel Chocks behind both tires on the Race Ramps before jacking up your car to place the opposite two tires on the Wheel Cribs.*
Back to top |
|
SHOW CRIBS
Show Cribs are a safe, stylish, and lightweight way to raise your vehicle for display. They can cradle the tire up to 12” off of the ground or we can cut them down to meet your specifications. Show Cribs are available in two models: a full pyramid tapered on all four sides (RR-SC-P), or for a smaller footprint, the RR-SC. They provide an unobstructed view underneath the car, and their tapered design lends a dramatic air to any vehicle display. A set of four will support 6,000 pounds.
Back to top |
|
ROLL-UPS
Roll-Ups are designed to be used in conjunction with 56” or 67” Race Ramps or 40” Sport Ramps. They raise the opposite end of the vehicle up 4”, enabling you to complete more difficult tasks such as changing the exhaust. Roll-Ups can also raise the front or rear of the car to allow the use of a standard floor jack. And at 14” wide, they can be used with tires up to 12” wide. They weigh only 4.5 pounds each and are small enough to fit in the trunk of a C5 or C6.
Back to top |
|
FLATSTOPPERS
This product helps to keep your tires from flat spotting during long periods of storage. Once the tires are set in the FlatStoppers (on a level surface), they will settle into the pad’s concave depression. More of the bottom portion of the tire will be fully supported, thus dispersing the weight of the car more evenly onto the tire and helping to prevent any flattening. FlatStoppers will not conduct heat or cold to your tires despite changing floor temperatures, will not damage your floor in any way, and will not slide.
Back to top |
|
SPORT RAMPS
They are ideal for most small sport cars, accommodating tires up to 8” wide and raising the car up 7”. They hold up to 3,000 pounds per set while weighing only 8 pounds per ramp.
Back to top |
|
SHOW RAMPS
Show Ramps can be used to raise up the front, back, or side of the car—or get two sets and raise up the entire car to make it stand out. Show Ramps are a great lightweight (only 6 pounds each) alternative to jack stands, floor jacks, and wooden blocks. They reduce the risk of damaging your car, and they can be transported with no risk of sliding and denting your trunk.
Back to top |
|
SCALE RAMPS
Scale Ramps rise 2.5" to work with all racing scales of this height. They are light weight. Less than 3 pounds each, and feature a textured surface that prevents slipping. Scale Ramps are constructed in one solid piece for strenght and stability and provide a lower cost alternative to factory ramps.
Back to top
|
|
TRAILER RAMPS AVAILABLE 4”, 5”, 6”, 7” OR 8” HIGH
Is your trailer door too steep to get your car to the race track or autocross? Are you tired of busting up your nose? Race Ramps has just the solution for you: simply place the trailer door on the notch of these specially designed Ramps and decrease your angle of approach to as little as 4°. These hassle-free, lightweight ramps work for cars weighing up to 6,000 pounds.
4” Trailer Ramps (RR-TR-4) are 46" long x 4" high x 14" wide (with 5.5° incline)
5” Trailer Ramps (RR-TR-5) are 67" long x 5" high x 14" wide (with 4° incline)
6” Trailer Ramps (RR-TR-6) are 45" long x 6" high x 14" wide (with 7.8° incline)
7” Trailer Ramps (RR-TR-7) are 74" long x 7" high x 14" wide (with 5.2° incline)
8” Trailer Ramps (RR-TR-8) are 54.75" long x 8" high x 16" wide (with 8.4° incline)
Back to top
|
|
TRAILER-MATES
When a car is parked on the ramps an additional 3” of ground clearance is created - making it much easier to reach the vehicle’s tie-down points, and open your door over the trailer wheel wells. Trailer-mates are an extremely durable and lightweight ramp system that won’t slide on the trailer surface, or scratch it. Concave depressions in front ramp sections prevent vehicle from rolling during transport. Trailer-mates are ideal for vehicles with tires up to 12” wide.
RR-TM-FRT - 36" long x 4.5" high x 14" wide (Front Pieces) (Set of 2) - 9 lbs ea.
RR-TM-REAR - 32.75" long x 3" high x 14" wide (Rear Pieces) (Set of 2) - 8 lbs ea.
Back to top
|
|
TRAILER SIDE KICKS
Trailer Side Kicks (RR-TR-SK) serve two purposes. First, they fit in front of a trailer's wheel wells to provide a tapered, protective guide between your vehicle's wheels and the trailer's steel wheel wells. Tall marker flags indicate their placement and help guide you onto the trailer without any scrapes or scratches. Second, Trailer Side Kicks can be used as ramps for changing a trailer tire. Simply drive the good tire onto the ramp and the flat tire will be lifted off of the ground for easy removal and replacement. Trailer Side Kicks lightweight but solid construction enables you to safely use them on any surface—pavement, grass, or even sand-without sinking. They are extremely durable and stable, supporting up to 8,000 pounds while weighing only 8 pounds each.
Back to top |
|
RACK RAMPS
 
Rack Ramps enable you to get modified, low-riding cars onto the service platform or lift without damaging the front end. There are two styles of Rack Ramps. Rack-4 Ramps (RR-RACK-4) weigh only 10 pounds each and are for a lift that has the ramps permanently attached. Rack-4 Ramps have a notch in them to accommodate the existing ramp and decrease the angle of approach by making the slope longer. Rack-5 Ramps (RR-RACK-5) weigh only 10 pounds each and are made for the four post lift with removable ramps. They have a lip that bridges over the operating rods or cables that run in front of the steel beam.
Back to top |
|
WHEEL CHOCKS
Wheel Chocks (RR-WC) are ideal for use with all Race Ramp products, providing additional safety in the working environment. Made from solid rubber composite with an extra-grip bottom, they each weigh 3 pounds.
* For increased safety, use Wheel Chocks with all Race Ramp products.*
Back to top |
|
WHEEL STANDS
Wheel Stands (RR-WS-14) offer you a 16" square working platform to accommodate scales a turntable, or to be used as a display block. They are lightweight (12 pounds per stand), yet sturdy and stable.
Back to top |
|
PORTABLE PIT STOP RAMPS
This ramp was designed for car enthusiasts and racers alike, enabling them to get their car up 14” in the air with ease. The adjustable wheel base (from 98” to 110”) makes it easy to accommodate a wide variety of cars. The racer’s model comes with a cut out section made to fit a 15” scale pad that is 2.5” thick. It also comes with a spacer to fill the cut out when the scales are not needed. The standard model is completely flat and has no cut out for scales.
Standard Model – RR-PPS
Racer’s Model – RR-PPS-R
Back to top
|
|
|
