You will be pleasantly surprised at the introductory $5.25 “installed” price!

This hardwood-like surface is much less expensive than hardwood flooring, or even laminate and you get the indoor look! It is available in multiple hardwood colors, slate and fleck finish as well.

Our Pro Garage Floors tile is made from PVC and recycled tires and is finished with a clear Amour Epoxy surface that has a ten year warranty so it is both environmentally-friendly and holds lasting value. Additional benefits that make this flooring suitable for a wide range of indoor and outdoor applications include: absorb noise, insulate, resist both water and burns, slip resistant, tough, hygienic and have less environmental impact than most floor covering options available on the market today.

Click Here to see our Styles.





CONSIDER THESE ADVANTAGES:

LOW-MAINTENANCE
Put away the pressure washer. Dirt cannot penetrate the surface and our resilient epoxy finish is impervious to all automotive fluids or chemicals.

AIRTIGHT
Provides an airtight  membrane against water, the #1 cause of concrete decay. Also covers surface irregularities such as cracks or patchiness.

DURABLE
Standard epoxy floors will crack as the concrete shifts. Painted surfaces need to be re-applied frequently to protect properly. Our Pro Garage Floors tiles won’t crack, last for years and provide tremendous “roll over” strength.

VALUE
Pro Garage Floors tiles can be installed for a fraction of the price of hardwood, laminate or tile. Add value to your home by covering unsightly concrete.

ENVIRO-FRIENDLY
Our resilient, adhesive plank system is comprised of recycled (PVC) plastic, recycled rubber and finished with a clear epoxy surface finish.

MORE?
Our tiles absorb sound much better than concrete and are warm and comfortable under foot. Use immediately – a basic 2-car garage installs in approximately 5 hours - no curing time like epoxy finishes.

Did you try PAINTING your garage floor to keep the
dust down and make it easy to clean?

Oops...If you used paint on your garage floor it has probably peeled.

NOW you can cover that up with an affordable option that will
Transform Your Garage ™ and create an attractive
alternative home entry you can be proud of!

Tile size: 12 inch by 36 inch by 3mm depth
Tile weight: 1.72kg 3.79lbs
Utilization Temperature: 28 to 270 degrees
Melting Temperature: 350 degrees
Compressive Strength: 8240 Psi
UV Stabilized: Yes
Flammability: No

Completely chemical resistant and stain tested against:

Oil (new and old), brake fluid, gasoline, hydrochloric acid, brake cleaner, carburetor cleaner, transmission fluid, battery acid, liquid caustic soda, airplane and helicopter oil and all fuels.

Material Quality:

50% PVC polyvinyl chloride
7% DOP

DOP is a very good general purpose plasticizer for polyvinyl chloride(PVC) and imparts excellent softness and good low and high temperature flexibility when compounded with this polymer. It has a high plasticizing efficiency (together with a degree of permanence for the majority of flexible PVC applications). Internationally, DOP is the standard against which all other plasticizers in flexible PVC industry are measured (e.g. the plasticizing efficiency of DOP is designated as 1.00). It’s heat and light stability are good and it is resistant to hydrolysis. It is used in cable coating compositions because it’s dielectric constant and power factor make it highly suitable for this purpose.

26% RECYCLED TIRES 15% FELDSPAR

Feldspar is a naturally occurring Potassium Aluminum Silicate rock occurring in pegmatite bodies. Feldspar is used as a flux in plastic industries. Also adds tremendous strength to the body. Feldspar is a rare occurrence of extremely pure mineral free from mica. The chief impurities namely clay, and other foreign matter all occur as fine bodies below one mm.

EPOXY FINISH

The epoxy coated finish provides the floor its shine while providing absolute protection against caustic substances.